[httpdocs/navigationbar.htm]

 

 

CUSTOM UPGRADE SERVICES AND COMPONENTS
REPAIR and UPGRADE SERVICES AVAILABLE for ALL AIR GUNS
SHERIDAN/PMI SPECIALTIES
* =INSTALLATION AND SETUP INCLUDED
Performance Tune with improved valving, hone and polish barrel, smooth and soften the action. "K" series, rifle, add $20.00 $79.00*
Direct Feed Pistol $55.00*
   Rifle (includes pump) $75.00*
QuikStrip system (includes machining) $20.00*
Ultra QuikStrip system (includes: Bolt,
   Spring Release Pin & Connector

                 "K" series, rifle,      add  $22.00          

             $50.00*

                    

   

Paladin conversion with QuikStrip
   Pistol Grip on YOUR Rifle
$80.00*
PGP Upgrade includes: Custom Barrel
   Direct Feed, center fire bolt and
   QuikStrip on YOUR PGP
$115.00*
   
QuikFire custom auto-trigger w/shoe
   (N/A rifle) (Ultra QuikStrip recommended)
$45.00*
Ball Feed Détente (no double feed) $12.00*
   On Stock-class pumpers $20.00*
Nickel Plating (brass tubes) $68.00*
Spiral Venting of Barrel: includes
   Chamfered Drilling, Honing & Polish
$41.00*
Hone and Polish (clean up) $16.00 
   To Re-size Bore I.D. (specify) $26.00*
Vertical or Back-bottle ASA on most Sheridan base airguns, eliminates front 12 gram $79.00*
Factory Rebuild, on Stroker and Typhoon, Complete replacement of all soft parts in the lower an upper tube, Upgrades as needed. Ram not included. $100.00*
   Hurricane $120.00*
Sight Rail, 2.5" Brass  can be soldered in many locations, also usable for tactical mount accessories. $20.00*
Barrels
Custom Brass Barrels
for most common paintguns
  $55.00
Spiral venting, quiet & consistent;  add $41.00
Dual Venting $63.00
Nickel Plated (matte finish);  add $25.00
Match Honed to specific gun;  add $25.00
CP Sight Rail Hood (ghost ring) Brass
Straight cut $15.00
Angle cut $20.00
Nickel Plated, add $5.00
with Custom Engraved Nameplate  add $40.00
Powder Coat $5.00
 

Full lines of Repair and Replacement parts are on hand for Sheridan and most other Paintball guns.
Other custom services available to bring your Existing equipment up to competitive standards or to personalize your equipment. For other Custom services, contact our competent Service Staff (all have more than a decade of Paintball experience) for pricing and scheduling. Use your imagination to get the best performance and handling characteristics from your existing equipment without the higher costs and inconvenience of a new paintgun. When you need all that you can get from your equipment, Palmer's Pursuit Shop has the Experience, the Talent, the Means, the Materials and the Desire to help you get what YOU need in and from your equipment!!
(916) 923-9676

 

Spyder Upgrades


EM1 Palmer LPR upgrade  $175 installed. Makes your ram pressure adjustable and more stable. Increases accuracy due to increased operational consistency. Includes rock of your choice.

EM1-palmer-stb.jpg (18831 bytes)

This is not a kit, we modify your existing LPR to accept a rock. The marker must be sent in.  The vertical bottle adapter mod is optional (add $35)

If you have questions about products or services on this page, please email for Info.

 
SPECIALTIES for AutoCockers
From the Originator of Automated
Cocking Systems for Paintguns
Retime.. adjustment of all timing parts and regs, We set them short but reliable. $25
General Service. Ultra Sonic Cleaning plus retime. Non electros only $35
Performance Tuning (firing system) includes: valve optimized for either CO2 or regulated pressure systems and timing setup of original components. Reduces turbulence and increases life of the marker. Lowers valve and cocking pressure.  (upgraded lug with lug lock screw , retime, external timing added on older cockers) LT valve included. Upgrade recommended before/along with the trigger job. 98 & up $75.00

97 cockers and below add $20

 

Ultra Mini-Cocker Conversion-All of the above Plus; Shorten and lighten main body, Ball Feed Détente, Threaded stainless trigger rod and coupler, ROCK regulator and more. set up for Bottom line or remote 275.00*
Pro-Touch Trigger Job; to shorten and soften trigger pull, includes: external hammer release adjustment, tuning the 4-way, trigger stops, detailing as needed, Palmer Stop included. $20 reduction for swing/pivot triggers 100.00*

80.00 if done with performance tune

    With 2-finger trigger shoe
    (remove trigger guard)
150.00*
Replacement Trigger Guard (2-finger) 25.00
E-Frame Install, with eye holes, timing included.  (2k or newer Cockers only please.) $100
Drill Eye Hole(s)eblade-eye-hole.jpg (32958 bytes) no disassembly required Sound and Break Beam Eyes

One Side $25

Two Sides $50

The above are just a few samples of what we can do for your Auto-Cocker Setting  up your paintgun to exactly what you want is what we specialize in.

Palmer Upgrade Path recommended for stock Cockers.

  1. Rock
  2. Barrel
  3. Stabilizer
  4. Performance tune or LT valve
  5. Quik Ram with QEVs
Then you must decide if you want electro or stay manual. If you stay  manual/mechanical trigger,  then go with a Quik Switch.

 

 

A STRONG INVENTORY OF REPAIR & REPLACEMENT PARTS AND UPGRADE COMPONENTS FOR MOST AIR-GUNS ARE IN STOCK FOR QUICK SERVICE AND SHORTER TURN-AROUND TIMES.

CAMOS .. Bushlan, Tiger Stripe, Diamond Back Real Tree and more

SAFETY EQUIPMENT
JT and SCOTT

SHERIDAN/CROSSMAN - NELSON BASED WGP - TIPPMANN -AIRGUN DESIGNS - etc.

 
Click the picture to see an break out of the typical components

Quick Pro Kit, installation & set up on your 'cocker $50.00 (labor only)

Click here for a more complete Auto Cocker Parts Price Listing

 

Bushmaster 2k Upgrades

bushmaster-lpr-adapter.jpg (23139 bytes) In stock
 

 Vapor Works Bushmaster LPR upgrade kit. $110 installed (micro rock included)   Makes your ram pressure adjustable and more stable. Increases accuracy due to increased operational consistency.

 

Sterling Upgrades

upgrade-ball-detente.jpg (15748 bytes) Install Ball Detente

Brass $19.50

Nickel $24.50

sterling-frame-rail.jpg (7596 bytes)
Sterling Frame Rail
Qty: Price: $20

Aluminum

 

Transaction fees are no longer applied. COD requires an additional $6.00 for UPS and &7.50 for Federal Express. Out of state checks require 10 working days to clear. Money orders are accepted.

Do it right, or don't bother.

          "The bitterness of poor quality remains long after the sweetness of                              low price is forgotten"